News Archive (1999-2012) | 2013-current at LinuxGizmos | Current Tech News Portal |    About   

Fanless rugged systems run Linux at temperature extremes

May 3, 2005 — by Henry Kingman — from the LinuxDevices Archive — views

Axiomtek has expanded its line of rugged, fanless computers with additional processor options and extended temperature versions. The eBOX series of computers are packaged in heavy-duty, aluminum and stainless steel housings and support both run Linux.

(Click here for larger image of the eBOX746-EFL)

The three devices are implemented using different processors, as indicated below, but share many features, according to Axiomtek. The common features include:

  • Processor and memory — see individual models, described below
  • I/O ports:
    • 3 RS232 serial ports, 1 RS232/422/485 port
    • RJ45 10/100 Ethernet
    • USB
    • VGA port
    • Parallel printer port
    • PS/2 keyboard/mouse
  • Expansion:
    • 2.5 inch HDD drive bay
    • Type II CompactFlash slot
  • Power — operate from both AC and DC power sources
  • Optional DIN rail wall mounting kit
  • Temperature range — see individual models, described below

The three devices are further differentiated as follows . . .

eBOX746-EFL

This is an extended temperature version of the eBOX746-FL (pictured above) which was introduced last November. It is available with Via Eden ULP processors ranging from 400 to 1000 MHz, and operates between -25 and +50 degrees C. It comes standard with 256 MB of SODIMM SDRAM expandable to 512MB.

eBOX745-EFL

This device is based on a 300 MHz Geode processor, and is the most cost-effective option when “I/O points” are more important than processing power, according to Axiomtek. It offers the same feature set as the eBOX746-EFL, and operates between -25 and +60 degrees C. A variation, the eBOX745A-EFL, substitutes a second RJ45 Ethernet port for two of the RS232 ports.

eBOX738-FL

The eBOX738-FL is available with either a Celeron M processor at 600 MHz or a Pentium M at 1.4 GHz. It supports up to 1 GB or RAM and operates between -25 and +50 degrees C. PCMCIA is supported through an optional PC/104+ module.


 
This article was originally published on LinuxDevices.com and has been donated to the open source community by QuinStreet Inc. Please visit LinuxToday.com for up-to-date news and articles about Linux and open source.



Comments are closed.