News Archive (1999-2012) | 2013-current at LinuxGizmos | Current Tech News Portal |    About   

Industrial PC offers cellular modem

Feb 23, 2010 — by LinuxDevices Staff — from the LinuxDevices Archive — 1 views

Lanner announced a fanless industrial PC with built-in GPS and 3G cellular capabilities. The LEC-7020 has a 1.6GHz Intel Atom N270 processor, two gigabit Ethernet ports, digital I/O, 2.5-inch disk storage, and a Mini PCI Express expansion slot, the company says.

According to Lanner, its LEC-7020 (left) distinguishes itself from typical box PCs aimed at the industrial and embedded markets by including both a GPS receiver and 3G cellular. The company doesn't provide any information about the underlying chipsets or available operating frequencies, but mention of a SIM slot suggests that the device is intended for GSM networks.

Lanner says the LEC-7020 also offers wireless local area networking (802.11 flavors not specified), plus a variety of wired connections. The front of the device, pictured below left, includes digital I/O (four in, four out, via a DB9 connector), four USB 2.0 ports, two gigabit Ethernet ports, and audio (mic in and line out) ports, according to the company. The rear, below right, is said to offer a serial port, a VGA output, and an input for 12VDC power.


The front (left) and back (right) of Lanner's LEC-7020
(Click either image to enlarge)

The LEC-7020 employs the evergreen Intel Atom N270 clocked at 1.6GHz, along with the 945GSE northbridge and ICH7M southbridge. Maximum memory, as expected on PCs using this chipset, is 2GB of DDR2 RAM, via a single SODIMM slot, Lanner adds.

Lanner says the LEC-7020 can support a 2.5-inch SATA hard disk drive internally. Meanwhile, Type I/II CompactFlash storage is accessible by opening the bottom of the device (pictured at right), as is the Mini PCI Express slot that's used to house the device's cellular modem.

According to Lanner, the LEC-7020 supports resolutions of up to 2048 x 1546 pixels via its VGA output, while LVDS graphics output is an available option. Operating from 14 to 131 deg. F (-10 to 55 deg. C), the computer has a Winbond W83627 temperature sensor and watchdog timer, the company adds.

Specifications listed by Lanner for the LEC-7020 include:

  • Processor — 1.6GHz Intel Atom N270
  • Chipset — 945GSE northbridge and ICH7M southbridge
  • Memory — Up to 2GB of DDR2 RAM via single SODIMM slot
  • Storage — Accepts 2.5-inch SATA devices; includes Type I/II Compact Flash slot
  • Expansion — Mini PCI Express (occupied by 3G modem card)
  • Networking:
    • LAN — 2 x gigabit Ethernet
    • WLAN (802.11 version not specified)
    • WWAN — 3G cellular with SIM card
  • Other I/O:
    • 1 x RS232
    • 4 x USB 2.0
    • Audio — mic in and line out
    • 1 x serial
    • DIO (4 in, 4 out)
  • Operating temperature — 14 to 131 deg. F (-10 to 55 deg. C)
  • Power consumption — 12VDC via 60W AC adapter
  • Dimensions — 7.92 x 5.8 x 1.68 inches (198 x 145 x 42mm)

Availability

According to Lanner, the LEC-7020 supports Linux 2.4.16 or above, as well as Windows XP and Windows XP Embedded. Pricing was not provided, but the device appears to be available now.

More information may be found on Lanner's website, here.


This article was originally published on LinuxDevices.com and has been donated to the open source community by QuinStreet Inc. Please visit LinuxToday.com for up-to-date news and articles about Linux and open source.



Comments are closed.